CELPRO | Traceabilty and process control
CELPRO | Traceabilty and process control
Resources
5Cases of application
Application sheet - 3 spindles tightening workstation - DOC.60421
Workstation equipped with a fixed center distance 3 spindles fastening head. Target torque 46 Nm.
3 Stanley QBE-Advanced tightening units & axial screwdriver E34LB1-100 & specific mechanism.
Application sheet - 5 stations carousel to install helicoil inserts - DOC.60417
Installation of helicoils on electric components in the military industry.
Download the file in pdf
Application sheet - Box assembly station on electronic board - DOC.60403
Controlled assembly of electronic boxes on a board without forgetting screws with printing at the end of the sequence of a report label.
Improved ergonomics for assembly operations.
Cycle time saving on the tightening operation.
Application sheet - Complete tightening workstation with in line transducerized tools - DOC.60422
Accurate tightening in vertical and horizontal position of a loom angle.
Download the file in pdf
Application sheet - Controlled assembly station - DOC.60397
Design and manufacturing of complete station equipped with HMI (DPC Touch) and presence sensor. Assembly of electric components of a charging plug unit for electric vehicle.
Download the file in pdf
Application sheet - DAMPER mounting station - DOC.60363
Station for mounting of a plastic DAMPER element on a part in an aluminum casing.
Ensure the DAMPER assembly directly in the final packaging with torque at 10 Nm with pre-tightening at 5 Nm and checking that the 4 parts have been correctly assembled.
Application sheet - Metrology board - DOC.60424
Metrology board dedicated to the control of tightening tools used for the maintenance of military machines in workshops and in operations.
Download the file in pdf
Application sheet - Multi torque tightening workstation - DOC.60410
To tighten M6 to M12 screws at various torques from 38,4 to 210 Nm.
Download the file in pdf
Application sheet - Srewfeeding unit - DOC.60395
Bollhöff screw feeding unit to dispense a preset number of screws on assembly station of electric vehicle propulsion unit. To be able to guarantee that the operator get the preset number of screw and to avoid risk of screw loss in the electric motor.
Download the file in pdf
Application sheet - Tightening workstation of firing pin - DOC.60412
Tightening of firing pins on pyrotechnic grenade at 2 Nm.
Download the file in pdf